Electric Pipe Threader
working a pipe threader?
Any info on tips or operation of a electric threader.
Is this a hard machine to use. Thanks
Its basically pretty easy to do . I assume you will be using a ridgid brand threader.
Long pipes will have to be supported at the end leaving the threader. Pipe lenghts of arround 4 feet you do not need the support stand.
Keep the threads well lubricated when cutting to keep the die teeth cool.
Don’t over thread… pipe threads are tapered at 3/4 inch per foot. The male and female threads are both tapered so the joint becomes a crush fit to seal the joint. (pipe dope is also recommended either teflon tape or rector seal #5)
The depth of the die cutting teeth are set at this taper. If you thread beyond this depth then the extra depth leaving the die will not have a taper and can bottom out in your fitting before properly engaging and sealing the joint.
The ridgid threader has a quick release on the threading attachment. The teeth are brought into cutting position with the lever. as the die nears the completion of its cut you stop the cutting by opening the teeth with this lever and stopping the maching. There should be a foot switch to start the motor, also make sure thatthe direction switch is set to forward.
Cutting teeth need to swapped for different size pipes. consult a thread chart for the proper pitch. The quick release threader attachment also has an adjustment for pipe size. The same pitch can be use on several sized pipe. Also make sure that all three sets of cutting teeth are the same size (pitch)
The first operation is usuall cutting the pipe to lenght.. this can be done by having the machine turn the pipe and operate the cutter braced against the rails.
After the pipe is cut the pipe inside diameter is reamed out with a tapered reamer to remove chips and create a smooth surface.
The pipe end is then threaded
|
|
1700W ELECTRIC PIPE THREADER KIT 4 DIES PROFESSIONALS $144.99 |
|
|
1700W ELECTRIC PIPE THREADER KIT 4 SIZES DIES POWERFUL $144.99 |
|
|
3/8-2″ Portable Electric Pipe Threading Threader 2400 W $209.99 |
|
|
ELECTRIC PIPE THREADER PORTABLE + 4 DIES POWER TOOL E-4 $129.99 |
|
|
PIPE THREADER ELECTRIC PORTABLE with dies tools ep-04 $129.99 |
|
|
ELECTRIC PIPE THREADER PORTABLE 4 DIES POWER TOOL EP-4 $129.99 |
|
|
OSTER 2″ PIPE THREADER W/ELECTRIC CHUCK RIGID PIPE $1,450.00 |
|
|
PIPE THREADER Handheld Electric with 4 dies & case NEW $169.00 |
|
|
RIDGID 114 600 HANDHELD ELECTRIC PIPE THREADER W/ DIES $99.99 |
|
|
PIPE THREADER ELECTRIC PORTABLE & 4 dies tools ep-4 $129.99 |
|
|
1700W ELECTRIC PIPE THREADER KIT 4 SIZES DIES POWERFUL $144.99 |
|
|
2000W 2-2/3 HP ELECTRIC PIPE THREADER KIT 1/2″ ~ 1-1/4″ $159.99 |
|
|
ELECTRIC PIPE THREADER PORTABLE + 4 DIES POWER TOOL $129.99 |
|
|
NEW! Klutch Heavy-Duty Portable Electric Pipe Threader! $319.95 |
|
|
COLLINS #151 HAND HEAD ELECTRIC PORTABLE PIPE THREADER $499.99 |
|
|
PIPE THREADER ELECTRIC PORTABLE + 4 dies in carry case $129.99 |
|
|
ELECTRIC PIPE THREADER PORTABLE + 4 DIES POWER TOOL $129.99 |
|
|
PIPE THREADER ELECTRIC PORTABLE with dies tools $129.99 |
|
|
PIPE THREADER ELECTRIC PORTABLE with dies tools $129.99 |
|
|
1700W ELECTRIC PIPE THREADER KIT 1/2″ to 1-1/4 PORTABLE $199.99 |
|
|
Heavy Duty Portable Electric 2″ Plumbing Pipe Threader $314.49 |
|
|
RIDGID 300 PIPE THREADER VISE PLUMBING ELECTRIC $99.00 |
|
|
PIPE THREADER ELECTRIC PORTABLE with dies tools $129.99 |
|
|
ELECTRIC PIPE THREADER PORTABLE & 4 DIES POWER TOOL P-4 $129.99 |
|
|
Heavy Duty Portable Electric 2″ Plumbing Pipe Threader $349.49 |
|
|
Portable Electric Threading Machine Pipe Threader 4Dies $119.99 |
|
|
PORTABLE ELECTRIC PIPE THREADING MACHINE THREADER 2000w $169.99 |
|
|
PORTABLE ELECTRIC PIPE THREADING MACHINE THREADER TOOL $139.99 |
|
|
NEW! Klutch Heavy-Duty Portable Electric Pipe Threader! $319.95 |
|
|
PIPE THREADER ELECTRIC PORTABLE & 4 dies tools ep-4 $129.99 |
|
|
NEW Heavy Duty Portable Electric Plumbing Pipe Threader $158.99 |
|
|
ELECTRIC PIPE THREADER PORTABLE + 4 DIES POWER TOOL $129.99 |
|
|
2000W 2-2/3 HP ELECTRIC PIPE THREADER KIT 1/2″ ~ 1-1/4″ $159.99 |
|
|
1700W ELECTRIC PIPE THREADER KIT 4 DIES PROFESSIONALS $144.99 |
|
|
NEW! Klutch Heavy-Duty Portable Electric Pipe Threader! $319.95 |
|
|
2000W 2-2/3 HP ELECTRIC PIPE THREADER KIT 1/2″ ~ 1-1/4″ $159.99 |
|
|
RIDGID 700 ELECTRIC PIPE THREADER + 1/2″ DIE UGLY WORKS $112.50 |
|
|
PORTABLE ELECTRIC PIPE THREADER WITH 4 dies PTHR $129.99 |
|
|
PIPE THREADER ELECTRIC PORTABLE & 4 dies tools ep-4 $129.99 |
|
|
Collins Machinery Corp electric pipe threader? $99.99 |
|
|
1700W ELECTRIC PIPE THREADER KIT PORTABLE 1/2″ to 1-1/4 $199.99 |
|
|
2000W 2-2/3 HP ELECTRIC PIPE THREADER KIT 1/2″ ~ 1-1/4″ $159.99 |
|
|
PIPE THREADER ELECTRIC PORTABLE + 4 dies case 2000w $129.99 |
|
|
2″ Portable Electric Pipe Threading Machine Threader $229.99 |
|
|
2000W 2-2/3 HP ELECTRIC PIPE THREADER KIT 1/2″ ~ 1-1/4″ $159.99 |
|
|
ELECTRIC PIPE THREADER PORTABLE + 4 DIES POWER TOOL $129.99 |
|
|
1700W ELECTRIC PIPE THREADER KIT PORTABLE 1/2″ to 1-1/4 $144.95 |
|
|
RIDGID 700 ELECTRIC PIPE THREADER GREAT CONDITION $899.99 |
|
|
PIPE THREADER ELECTRIC PORTABLE + 4 dies case 2000w $129.99 |
|
|
PORTABLE ELECTRIC PIPE THREADER WITH 4 dies PTHR $129.99 |
